聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

Charge transport properties of MDMO PPV thin films cast in different solvents

Charge transport properties in thin films of Poly(2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylenevinylene) (MDMO PPV) cast using either chloroform (CF), toluene (TOL), or chlorobenzene (CB) as solvent were investigated. Hole mobility (μ) in these thin films measured using time‐of‐flight transient photoconductivity showed an increasing trend with respect to the solvent used in the same order, that is, μ_CF (2.4 × 10^?7 cm²/Vs) < μ_TOL (6.9 × 10^?7 cm²/Vs) < μ_CB (2.3 × 10^?6 cm²/Vs). Observed variations in mobilities were attributed to different morphologies of MDMO PPV chains in thin films cast using the aforesaid solvents. Nature of the interchain interactions and aggregate formation were obtained using photoluminescence (PL), Raman spectroscopy, and AFM studies. Ratio of PL peak intensities of 0–0 and 0–1 transitions, which is a direct measure of interchain interaction, was the highest in CB and lowest in CF. Variation in the relative intensities of out‐of‐plane wagging of vinylene group (～963 cm^?1 mode) in Raman spectra suggested different extent of coiling of polymer chains in these thin films. From these observations, it was elicited that aggregate size and interchain interactions are highest in CB and least in CF. AFM‐based topographic images of thin films further supported these variations in the size of aggregates. Variation in the aggregate sizes and interchain interactions explained the corresponding variation in the mobility. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1431–1439     

空中目标多波段红外辐射特性描述与仿真分析

针对空中目标在复杂背景下的探测需求,根据实际目标的运动特性,分析目标在飞行高度、飞行姿态角改变时的辐射特点,基于MODTRAN计算得到大气辐射和衰减数据,建立目标的三维模型、热辐射和反射模型,搭建空中目标的红外成像仿真系统.分析和仿真结果表明:在中波波段,目标尾焰的红外辐射比蒙皮强很多,在长波波段,蒙皮的红外辐射比较强,仿真图像的细节比较多,尾焰的红外辐射虽然有所减弱,红外成像效果依旧很好;相同探测条件下,由于位置越高大气越稀薄,探测器的可探测距离会变得比较远.目标红外辐射特性的分析和红外仿真系统的搭建对缩短红外探测器的研制周期和进一步确定探测器波段和系统分辨率等指标提供了参考依据.     

REMEDIATION OF POLLUTED SOILS BY UTILIZING HYDROTHERMALLY TREATED CALCAREOUS FLY ASHES

This paper investigates a treated fly ash to act as a synthetic zeolite to remediate soils polluted with heavy metals and metalloids （As, Pb, Cu, Zn, Fe, Cd and Mn）. Four types of such ＇zeolites＇ were synthesized by hydrothermal treatment of a calcareous fly ash derived from Greek lignite-fired power plants： two with excess of sodium hydroxide in a solid/liquid ratio of 50 g·L^-1, and two with excess of fly ash in a solid/liquid ratio of 100g·L^-1. Soil samples were obtained from a former mining site at Lavrion, Greece. Mobilization and transfer of metals to the retention agents was effected by using HCI aq 1M, with satisfactory results with respect to As, Pb, Cu, Mn and Cd. The great variety of metal complexes in soil was found to be of major importance for the effectiveness of the overall process. The final products were solidified either on their own, or by using additives such as lime and cement.     

Weak Nonlinear Analysis of Moderate Stefan Number Oscillatory Convection in Rotating Mushy Layers

We consider the solidification of a binary alloy in a mushy layer subject to Coriolis effects. A near-eutectic approximation and large far-field temperature is employed in order to study the dynamics of the mushy layer with a Stefan number of unit order of magnitude. The weak nonlinear theory is used to investigate analytically the Coriolis effect in a rotating mushy layer for a new moderate time scale proposed by the author. It is found that increasing the Taylor number favoured the forward bifurcation.     

SOLVING THE FREE BOUNDARY PROBLEM IN CONTINUOUS CASTING BY USING BOUNDARY ELEMENT METHOD

ＳＯＬＶＩＮＧＴＨＥＦＲＥＥＢＯＵＮＤＡＲＹＰＲＯＢＬＥＭＩＮＣＯＮＴＩＮＵＯＵＳＣＡＳＴＩＮＧＢＹＵＳＩＮＧＢＯＵＮＤＡＲＹＥＬＥＭＥＮＴＭＥＴＨＯＤＬｉＹａｏｙｏｎｇ（李耀勇）；ＺｈａｎｇＺｈｉｌｉ（张自立）（ＲｅｃｅｉｖｅｄＪｕｎｅ，１８，１９...     

连铸结晶器内部流场及熔渣卷入的数值模拟

针对连铸结晶器内部流场及熔渣卷入过程 ,提出了两方程k -ε湍流模型和充填法数值计算模型 ,并采用硅油 /水模拟体系代替熔渣 /钢液体系 ,进行了模拟试验和数值计算。对充气造成的浸入式水口水流脉动的影响进行分析。计算结果与试验结果符合良好 ,表明本文所采用的数值模拟方法是适用的     

Thermal analysis of the roll in the strip casting process

Coiled strip can be directly produced through the twin-roll strip casting process from the melt by incorporating casting and hot rolling together into a single step. In this unique process, the strip formation from the molten metal critically relies upon the casting rolls. Thus, the design of the rolls is extremely essential. The coupled heat transfer and deformation analysis of the casting roll is carried out in a two-dimensional numerical model, using a finite element program (MARC) to examine the thermal stress and displacement. The effects of several factors such as the nickel overlay thickness on the roll surface, the casting speed, and the roll diameter on thermal characteristics are investigated.     

国产润滑油的压粘系数和固化压力

润滑油的压粘系数和固化压力是弹流理论应用于摩擦学工程设计的关键试验数据。本文报道了20种国产润滑油的压粘系数和其中16种润滑油的最小固化压力的测定结果,并对不同油田的基础润滑油、不同化学结构的合成润滑油和不同用途的工业润滑油的压粘系数和固化压力进行了分析比较。     

Effect of Membrane Preparation Methods on the Release of Theophylline through CA Membranes at In-Vitro Conditions

In this study the effect of the membrane preparation methods on the release of theophylline through cellulose acetate (CA) membranes was studied at in vitro conditions. CA/acetone binary and CA/acetone/water ternary systems were used as casting solutions and poly(ethylene glycol) (PEG) was used as the pore forming, plasticizing agent in the study. Membranes were characterized by FTIR, SEM, and DSC analysis. It was determined that pH, temperature and drug concentration affected the release of theophylline. A decrease in pH, increase in temperature and drug concentration increased the permeated amount of theophylline through the membranes. In addition, receiver solution circulation at a capillary blood rate increased the permeation of theophylline. As a result of the study, it was concluded that the release of theophylline could be controlled for a prolonged period of time and modified CA membranes prepared in the study could be as an advisable membrane material for potential release of theophylline at transdermal conditions.